Hose Applications » Oil & Fuel Transfer » Flowtex - Product Code 759

Technical Information

We can offer hoses suitable for applications involving oil and fuel transfer.

Our technical information, whether verbal, in writing or by way of trail sampling, is given in good faith but without warranty, and this also applies where propriety rights or third parties are involved.

It does not release you from the obligation to test the products supplied by us as to their suitability for the intended processes and uses.

The application, use and processing of the products are beyond our control, therefore, entirely your own responsibility. Should, in spite of this, liability be established for any damage, it will be limited to the value of the goods delivered by us and used by you.

We will of course provide consistent quality of our products within the scope of our General Conditions of Sales and Delivery.

All technical specifications apply to a temperature of 23°C +/- 2°C (ISO 291). Any increase of temperature, above or below, will affect the performance data. Tolerance on all specification +/- 5%.

We reserve the right to change all technical data without prior notice.

Product: 759 - FLOWTEX (ANTI-STATIC)

Description: This hose is produced in a continuous process where Nitrile ribber is forced through a circular woven textile. The hose is electrically conductive and has a resistant of maximum 106 Ohm.

Temperature Range: -30°C +70°C

Applications: Industry, oil spillage, and oil reclamation. Developed for delivery of explosive and inflammable liquids. Also can be used as a regular fire hose.

Advantages: Highly resistant to oils, chemicals. High working pressure light in weight. A multi-purpose hose. High working and burst pressures.

I.D.
Inches
I.D.
mm
Weight
gr./mtr.
Bursting
Pressure
bar
Diameter of 25m
Hose Coil
w/coupling
cm
Coil
Length
mtr.
1 25 220 70 45 200
1.5 38 300 55 45 200
2 51 400 50 45 200
2.5 65 500 50 45 200
3 76 600 45 45 200
4 102 900 35 48 200
6 150 1300 25 48 200